Home

PCN-110

About MaxTech

Dual Speed 10/100Mbps PC Card Ethernet Adapter

Products MaxTech's PCN-110 adapters make it easy for you to connect to your 10Base-T network or Fast Ethernet 100Base-T network. Each 16-bit PC card features dual speed (autosensing) support for both 10Mbps and 100Mbps systems and includes a media coupler for both 10BASE-T and 100BASE-TX wiring.

In addition, each PCN-110 adapter features N-WAY auto negotition and full duplex operation. This increases network throughput while decreasing CPU utilization for faster and more efficient network performance.

MaxTech PC Card adapters include drivers for all popular network operating systems including Novell NetWare, Artisoft LANtastic/AI, Banyan Vines, Microsoft LAN Manager, Windows NT, Windows 95, Windows for Workgroups, IBM TCP/IP for DOS & OS2, DEC PATHWORKS and other ODI and NDIS compliant systems.

Conforming to IEEE 802.3u and PCMCIA Type II specifications, MaxTech Fast Ethernet Adapters are manufactured in certified ISO 9001 Quality Assured facilities and backed with a Five Year Warranty for superior performance and reliability.
Where to Buy
File Library
Tech Talk
Site Map
 

Modems

Monitors

Notebook Computers

Networking Products

PCMCIA Products

 

SPECIFICATIONS

  Network Standard: IEEE 802.3, 802.3u
Topology: Star
Interface: PCMCIA Type II
Media Supported: Cat. 3 UTP and Cat. 5 STP
Transmission Rate: 10 Mbps & 100Mbps
Full Duplex Operation: 10 Mbps & 100Mbps
Data Bus Width: 16-bit
I/O Address: Automatically determined by Plug and Play configuration
Power Consumption: 2 W
Temperatures: 0 to 55 degrees C (operating:); -20 to 80 degrees C (nonoperating)
Humidity: 10% to 90% (non-condensing)
Certification: FCC Part 15 Class B
Extensive Driver Support:
ODI: Netware 3.11, 3.12, 4.x.
NDIS: Artisoft LANtastic/AI, Banyan VINES, DEC PATHWORKS, IBM LAN Server, IBM 0S2, IBM TCP/IP for DOS & OS2, Microsoft LAN Manager, SUN PC-NFS, Windows for Workgroups, Windows NT, Windows '95/’98 and other ODI and NDIS compliant systems.
Packet Drivers:
FTP TCP/IP, NCSA TCP/IP
System Requirements: A 486 Laptop with 50MHz CPU, 8MB of RAM, 6MB Disk Space, WINDOWS '9x/WIDOWS NT/MS DOS or WINDOWS 3.x with 16bit Standard PCMCIA Type II Slot

 

[ Home ] [ About MaxTech ] [ Products ] [ Where to Buy ] [ File Library ] [ Tech Support ] [ Site Map ]